Solving Media Card Reader Problems - HP Compaq MultiSeat ms6000 Troubleshooting Manual

Troubleshooting guide hp compaq multiseat ms6000 desktop
Hide thumbs Also See for Compaq MultiSeat ms6000:
Table of Contents

Advertisement

Solving Media Card Reader Problems

Table 2-4
Solving Media Card Reader Problems
A write-protected or locked error occurs when attempting to write to the media card.
Cause
Media card is locked. Locking the media card is a safety feature
that prevents writing to and deleting from an SD/Memory Stick/
PRO card.
Can not write to the media card.
Cause
The media card is a read-only memory (ROM) card.
Media card is locked. Locking the media card is a safety feature
that prevents writing to and deleting from an SD/Memory Stick/
PRO card.
Unable to access data on the media card after inserting it into a slot.
Cause
The media card is not inserted properly, is inserted in the wrong
slot, or is not supported.
Do not know how to remove a media card correctly.
Cause
The computer's software is used to safely eject the card.
After inserting a media card in the reader, the computer attempts to boot from the media card.
Cause
The inserted media card has boot capability.
ENWW
Solution
If using an SD card, make sure that the lock tab located on the
right of the SD card is not in the locked position. If using a
Memory Stick/PRO card, make sure that the lock tab located
on the bottom of the Memory Stick/PRO card is not in the
locked position.
Solution
Check the manufacturer's documentation included with your
card to see if it writable. Refer to the previous section for a list
of compatible cards.
If using an SD card, make sure that the lock tab located on the
right of the SD card is not in the locked position. If using a
Memory Stick/PRO card, make sure that the lock tab located
on the bottom of the Memory Stick/PRO card is not in the
locked position.
Solution
Ensure that the card is inserted properly with the gold contact
on the correct side. The green LED will light if inserted properly.
Solution
Click Start > Computer, right-click on the corresponding drive
icon, and select Eject. Then pull the card out of the slot.
NOTE:
Never remove the card when the green LED is
flashing
Solution
If you do not want to boot from the media card, remove it during
boot or do not select the option to boot from the inserted media
card during the boot process.
Solving Media Card Reader Problems
13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Compaq MultiSeat ms6000 and is the answer not in the manual?

Questions and answers

Table of Contents