2-5. USB Connection and Safe Removal
The player supports standard USB disk function with operating system of Windows98 (driver needed),
Windows 2K and above (driver free), Mac OS 10.3 and above, Linux 2.4.2 and above.
The player's power can be supplied through the USB cable. In waiting Mode, press MENU to activate
main menu, then select to enter desired mode.
Connecting to a PC: Power ON the player and plug in the USB cable to enter the following Mode 1.
The player will display the following modes when connected to a PC:
1. Waiting:
You should not disconnect the MP3 Player from the PC while it's reading or writing, or else it will cause
your data lost.
. Safe Removal of USB from Your Computer
2-5-2
1) Select the Plug-n-play Device icon from the Windows Taskbar, right-click on it, and select Safely
Remove Hardware.
2) Select the hardware device you want to stop and click on the Stop button.
3) Select the drive you want to stop and click OK
4) Click Close to complete this process.
Caution: Failing to disconnect this product from your computer by the standard procedure may damage
this product.
3. Functions
3-1. Basic Operation
I. Turning ON/OFF
Turn on
After pushing the Power button (OFF→ON), the player turns ON automatically and enters power ON
logo interface:
When connecting the USB plug to PC, the player turns ON automatically enters USB mode.
Long press the "PLAY" button to turn ON.
Turning OFF
Long press the "PLAY" button to turn OFF
Push Power button to OFF to power off the player.
II. Entering Menu System
Pressing MENU button enters the menu system, including main menu (long press MENU button at
Stop state), submenu at Play state (press MENU button to enter) and submenu at stop state (press
MENU button to enter).
Browsing
2. Downloading:
5
3. Uploading:
Need help?
Do you have a question about the MP-S10 and is the answer not in the manual?
Questions and answers