Table of Contents
Advertisement
Onboard Devices Configuration
Onboard Floppy Disk Controller ......[Enabled]
Onboard IDE Primary Channel .........[Enabled]
Onboard IDE Secondary Channel .......[Enabled]
Onboard PS/2 Mouse (IRQ 12) .........[Enabled]
Onboard USB .........................[Disabled]
USB Legacy Mode ..................[--------]
Onboard Ethernet Chip ...............[Enabled]
SMBUS Interrupt(IRQ9) ...............[Enabled]
= Move Highlight Bar,
PgDn/PgUp = Move Screen
Serial Port 1
This parameter allows you to enable or disable the serial port 1. The
Base Address and IRQ items are configurable only if this parameter is
enabled.
This function lets you set a logical base address for serial port 1. The
options are:
3F8h
2F8h
3E8h
2E8h
This function lets you assign an interrupt for serial port 1. The options
are IRQ
3
and
4
.
BIOS Utility
= Change Setting, F1 = Help
BASE ADDRESS
IRQ
Page 2/2
2-23
Advertisement
Table of Contents
