For Hp-Ux 9.X Only, Configure X Windows And Hp Vue; Setting Up A Single Monitor System (Hp-Ux 9.X Only) - HP Model 744 - VME Workstation Manual

3. For HP-UX 9.x only, Configure X Windows and HP VUE

NOTICE:
If your HP–UX 9.x system is running X windows and HP VUE, use these procedures to
configure your new HCRX/VME graphics option.
Follow the instructions in "Setting Up a Single Monitor System" to set up your system to
use only the HCRX/VME graphics. Follow the instructions in "Setting Up a Dual
Monitor System" to set up your system to use both the HCRX/VME graphics and the
built–in graphics.
Setting Up a Single Monitor System (HP–UX 9.x only)
This subsection describes how to set up your workstation to use only the HCRX/VME
graphics.
a.
Log in as root.
b.
Enter the following command line to create a device file to support the HCRX/VME
graphics adapter:
Where new_device_name can be any name that doesn't already exist in the /dev
directory.
This command allows the operating system to recognize the new graphics device.
If you use HP–UX 10.20 or HP-RT as your operating system,
please go to Chapter 2.
/etc/mknod /dev/new_device_name c 12 0x000000
Preparing for the Installation
Enter
1–5