Model 743 - HP Model 744 - VME Workstation Manual

Model 743

a.
A message similar to the following is displayed on each monitor connected to a
graphics device recognized by the system:
Press n to select this CONSOLE
Where n is a single digit number.
When the message is displayed clear and undistorted on the monitor you wish to use
as the console device, enter the number that is displayed on that monitor.
NOTICE: The message is displayed for only seven seconds before proceeding
to the next monitor resolution. Make the monitor selection as soon
as possible after the message is displayed.
NOTICE: If this message is not displayed on your monitor, review the
procedures in Chapter 1 and Chapter 2 to make sure that you
correctly installed the option board.
b.
The following message is then displayed:
TO CONFIRM THIS DEVICE AS THE CONSOLE, press [Esc]
Press to confirm your selection.
Esc
NOTICE: The message is displayed for only three seconds before console
search is resumed. Press
is displayed.
The following message is then displayed on the selected display:
Setting Your Graphics Configuration
as soon as possible after the message
Esc
3–5