Replace The Sbc In The Card Cage - HP Model 744 - VME Workstation Manual

8. Replace the SBC in the Card Cage.

a.
Replace the SBC in the VME card cage.
b.
Push on the SBC's ejector handles until it is fully seated in the card cage, as shown
in Figure 2–9.
c.
Use a small flat blade screwdriver to tighten the two captive screws on the SBC and
the two captive screws on the expansion slot.
Figure 2–9. Replacing the Single Board Computer
Installing the HCRX/VME Graphics Hardware
2–13