Connect The Monitor - HP Model 744 - VME Workstation Manual

Installing the HCRX/VME Graphics Hardware

9. Connect the monitor.

a.
Connect adapter cable A4304A to the connector on the HCRX/VME board, as
shown in Figure 2–10. Be sure to firmly tighten the screws on the connector.
b.
Connect one of the following monitors to the connector on the adapter cable:
1280 x 1024, 17–inch Monitor
1280 x 1024, 19–inch Monitor
c.
Connect monitors to any other graphics device(s).
2–14
Figure 2–10. Connecting the Adapter Cable