HP Model 744 - VME Workstation Manual page 46

Setting Your Graphics Configuration
For example: In the example CONSOLE PATH MENU in Step b above, if you
wanted to make GRAPHICS 2 your default console device, you would press
2
The CONSOLE PATH MONITOR TYPE menu is then displayed.
e.
Select the parameters for the monitor connected to the graphics device which you
chose in the previous step by pressing the number in the Key column and pressing
.
Enter
f.
Press
g.
Press
h.
Press
If your system is running HP–UX 9.x, once the system boots, your installation and
configuration is complete.
If your system is running HP–UX 10.x, once the system boots, go to Step 3.
If your system is running HP–RT, go to the X11 SERVERrt Installation and
Configuration Guide..
3–10
.
Enter
5 5
.
Enter
0 until the MAIN MENU is displayed.
Enter
7 7
to reset the system and restart the boot process.
Enter