For systems with an HP-UX operating system, use the following table to determine
what the BCH designations are for each option.
Graphics Configuration
If you have three installed options:
Onboard Graphics
HCRX/VME Graphics Option
A4267A Graphics Option
If you have these two options:
743 Onboard Graphics
HCRX/VME Graphics Option
If you have these two options:
HCRX/VME Graphics Option
A4267A Graphics Option
If you have this one option:
HCRX/VME Graphics Option
* Three Graphics Devices are supported only on HP–UX 10.0 or later.
d.
On the CONSOLE PATH MENU, find the number under the Key column that
corresponds to the GRAPHICS device that you want to set as the default console
device. Enter that number on your keyboard and press
Setting Your Graphics Configuration
Boot Console Menu Label
The designations are:
GRAPHICS 1
GRAPHICS 2
*GRAPHICS 3
The designations are:
GRAPHICS 1
GRAPHICS 2
The designations are:
GRAPHICS 1
GRAPHICS 2
The designation is:
GRAPHICS 1
Enter
.
3–9