HP Model 744 - VME Workstation Manual page 40

Setting Your Graphics Configuration
b.
The following message is then displayed:
Press the <ESC> key to confirm selection of GRAPHICS(1)
as the CONSOLE.
This selection will time out if not confirmed.
Press
Esc
to the previous console selection screen.
c.
After confirming your selection of the console device, the system begins the
sequence to boot from the primary path stored in the Boot ROM.
If the boot path is not valid, the Boot Console Handler's Main Menu is displayed as
follows:
–––––– MAIN MENU ––––––––––––––––––––––––––––––––––––––––––––––
Command
–––––––
BOot [PRI|ALT|<path>]
PAth [PRI|ALT|CON|KEY|<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration [<command>]
INformation [<command>]
SERvice [<command>]
DIsplay
HElp [<menu>|<command>]
RESET
––––––
Main Menu: Enter command>
You must enter or define a boot path to boot the system.
3–4
to confirm your selection. If you do not press
Description
–––––––––––
Boot from a specified path
Access Configuration menu/commands
Access Information menu/commands
Access Service menu/commands
Redisplay the current menu
Display help for menu or command
Restart the system
, the screen returns
Esc