Problem Solving; Troubleshooting - Panasonic DP-8035 Operating Instructions Manual

Problem Solving

Troubleshooting

If You Have Any of These Problems:
Mode
During
Transmission
Transmission Copy
Quality
During Reception
184
Symptom
Document doesn't 1. Check that your document is free of staples and paper clips, and
feed/multiple feed that it is not greasy or torn.
2. Check that your document is the right type to send through an
ADF by consulting. If your document has the characteristics
listed, use the Platen instead.
3. Check that the document is loaded properly.
Does not stamp Check Fax parameter No. 004 (Stamp (HOME)), and No. 028
(Stamp At Memory XMT) settings.
Stamp too light Replace stamp.
Vertical lines on the Check own copy quality. If copy is OK, your machine has no
transmitted document problem, report to the receiving party that they have a problem. If
copy is NG, clean the document scanning surface area.
Transmitted
document is blank
Recording paper Remove the misfeed paper.
misfeed (See the Operating Instructions (For Basic Operations))
Recording paper Make sure that there is paper in the Paper Tray. Follow the
doesn't advance into instructions for loading paper.
machine
Recording paper Check to see if the recording paper is jammed inside of the
doesn't eject after machine.
printing
Document auto Check Fax parameter No. 024 (Print Reduction) setting.
reduction doesn't
work
Possible Cause / Action Page
---
168
169
192
---
---
---
---
27
169