Panasonic DP-8035 Operating Instructions Manual page 171

No. Parameter
132 Via Fax Server
140 LAN RLY XMT Request
141 LAN XMT Reduce
142 Relay XMT
(a.k.a. LAN Relay
Station on UF-770i)
143 Relay XMT Report
144 EMAIL Character Set
145 Sender Selection
146 POP Timer
147 Auto POP Receive
148 Del POP Receive Mail
149 Del POP Error Mail
150 Ifax Return Receipt
151 EMAIL Header FMT
152 Sub-Addr Routing
Setting
Invalid Selecting whether to communicate using RightFax Server.
Valid When this parameter is set to Valid, the machine communicates passes
through the RightFax Server not using PSTN. For more details, refer to
Operating Instructions (For User Authentication).
Invalid Selecting whether the machine performs LAN Relay XMT Request.
Valid
Invalid Selecting whether to automatically reduce from LEDGER / B4 to A4, when
Valid LEDGER / B4 documents are transmitted via LAN.
Invalid : No reduction
Valid : Automatic reduction from LEDGER / B4 to A4
Invalid Selecting whether the machine accepts and performs G3 relayed transmission.
Valid (Relay Station Functions)
Off Setting how the COMM. Journal for relayed transmission is sent to the
Always originator.
Inc Only Off : Don't send.
Always : Always send.
Inc Only : Send only if communication has failed.
Japanese Selecting the Character Set when receiving or sending email text.
English
Invalid Selecting a pre-programmed sender's name and email address before each
Valid transmission.
0 to 60 min. Setting the time interval for the machine to check for email on the POP Server.
(0 = Does not check the POP Server for email.)
Invalid Selecting whether the machine automatically downloads an email from the
Valid POP Server.
Invalid Selecting whether the email will be deleted automatically after retrieval from
Valid the POP Server.
Invalid Selecting whether to delete the email that includes an incompatible file
Valid attachment from the POP Server.
Invalid Selecting whether to send a return receipt when receiving from another
Valid Panasonic Internet Fax.
All Selecting the header information to print when an email is received. (Normally
S/F/T used for Troubleshooting. It shows the path of the email transmission before
(Subject/ arriving at your machine.)
From/To)
Off
Invalid Selecting whether to automatically route a received fax, or email using ITU-T
Valid sub-address.
Comments
Continue on the next page...
171