Problem Solving; Troubleshooting - Panasonic DP-2330 Operating Instructions Manual

Problem Solving

Troubleshooting

If You Have Any of These Problems
Mode
Document doesn't
feed/multiple feed
During Transmission
Does not stamp
Stamp too light
Vertical lines on the
transmitted document
Transmission Copy
Quality
Transmitted document
is blank
Recording paper
misfeed
Recording paper
doesn't advance into
machine
Recording paper
During Reception
doesn't eject after
printing
Document auto
reduction doesn't work
Box
Continued on the next page...
Symptom
1. Check that your document is free of staples and paper
clips, and that it is not greasy or torn.
2. Check that your document is the right type to send through
an ADF by consulting the list on "Originals You Cannot
Send". If your document has the characteristics listed, use
the Platen instead.
3. Check that the document is loaded properly.
Check Fax parameter No. 04 and No. 28 settings.
Replace stamp or refill ink.
Check own copy quality. If copy is OK, your machine has no
problem, report to the receiving party that they have a
problem. If copy is NG, clean the Document Scanning Area.
Replenish the recording paper.
: Add Paper
Remove the misfed paper.
(See the Operating Instructions for Copier)
Make sure that there is paper in the Paper Cassette. Follow
the instructions for loading paper.
Check to see if the recording paper is jammed inside of the
machine.
Check Print Reduction settings.
Replace the Toner Bottle.
: Add Toner
Install the Waste Toner Box.
: No Waste Toner
Possible Cause / Action Page
17
190
191
212
---
---
---
---
---
34
---
---
207