Panasonic DP-8035 Operating Instructions Manual page 189

Digital imaging system for facsimile and internet fax/email functions
Hide thumbs Also See for DP-8035:
Table of Contents

Advertisement

Info. Code
722
Failed to obtain IP address from the DHCP server.
725
DNS Server connection timed out. DNS Server is
down.
726
Received an error response from the DNS Server.
728
The document was sent to the Internet Fax in an
incompatible file format (PDF).
Note: PDF file format is only used when sending an
Internet Fax to a PC.
729
Failed to authenticate (SMTP Authentication) when
connecting with the SMTP server.
730
Cannot retrieve the Journal nor program the Internet
Parameters and the Auto Dialer remotely via email
from a PC.
731
The dialer buffer for manual dialling was full (70
stations) when the Relay Transmission Request was
received.
800/814/
Unit was requested to relay a document or
816/825
Confidential Communication but has no capability.
815
Mailbox is full.
826
The received sub-address is not preprogrammed in
the address book.
870
Memory overflow occurred while storing documents
into memory for transmission.
NOTE
1. After identifying the problem and verifying the recommended action, if the Information Codes keep
reoccurring or for help on Information Codes that appear on your machine but are not listed above,
please contact your local Panasonic Authorized Dealer.
For mechanical failures, see the Troubleshooting section in the Operating Instructions (For Basic
Operations).
Meaning
Possible Action
Check the 10Base-T/100Base-TX cable
connection.
Confirm that the Internet Parameter and the
DHCP server are correctly configured before
turning on or turning off the power.
Contact the Network Administrator.
Check the DNS Server IP Address.
Contact the Network Administrator.
Check the POP Server Name.
Check the SMTP Server Name.
Change the XMT File Type (Fax Parameter
No. 177 (XMT File Type)) to "TIFF".
Check the SMTP Authentication. User Name
and Password.
Contact the Network Administrator.
Check that the Fax Parameter No. 158 (PC
Remote Update) is set to "Valid".
Request the originator to re-send the Relay
Transmission Request after the reserved
communication is finished.
Check with the other party.
Install Optional Flash Memory Card.
Check entries in the address book. Check the
entry of the sub-address of the remote station.
Transmit documents without storing into
memory.
Page
9
---
---
173
173
172
---
---
---
140
18
189

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dp-8045Dp-8060

Table of Contents