On-Hook Dialling - Panasonic DP-8035 Operating Instructions Manual

Facsimile Features
Sending Documents

■ On-Hook Dialling

1
or
(1 page only)
NOTE 1. If you need a special access number to get an outside line, dial it first then press Pause key to enter a
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling, press
24
2
pause (represented by a "-") before dialling the full number.
Ex: 9 PAUSE 5551234
key (represented by a "/").
The dialling mode will change from Pulse to Tone after dialling the digit "/".
Ex: 9 PAUSE * 5551234
3
You will hear a dial tone
through the monitor speaker.
To adjust the Monitor
volume, see page 160.