User Parameters (Internet Parameters) - Panasonic DP-8035 Operating Instructions Manual

Internet Fax Features
Setting the Internet Parameters

■ User Parameters (Internet Parameters)

Depending on how your machine will be configured to communicate on the LAN, the appropriate parameters listed in the table
below must be set up first. (See page 46)
Parameter
01 Logo
02 Character ID
03 ID No.
04 Time Zone
05 EMAIL Address
06 SMTP Server Name
(See Note)
07 SMTP Server IP
08 SMTP AUTH Name
(See Note)
09 SMTP AUTH Password
10 POP Server Name
(See Note)
11 POP Server IP
12 POP User Name
13 POP Password
15 LDAP Server Name
(See Note)
16 LDAP Server IP
17 LDAP User Name
18 LDAP Password
19 LDAP Search Base
NOTE 1. These setting is required only when "26 DNS Server Address" in General Settings is set to "Yes".
54
Up to 25 characters & digits.
Up to 16 characters & digits.
Your Fax Telephone Number. (Up to 20 digits)
The Time Zone is required as part of the Email header information when sending
Internet faxes.
The Email Address assigned to your machine for sending and receiving. (Up to
60 characters)
The name of the SMTP Mail Server with Port Number. (Up to 60 characters)
IP Address of the SMTP Mail Server with Port Number.
The SMTP Auth Name. (When you set this Parameter, change the setting of Fax
Parameter No. 170 (SMTP Authentication) to "Valid" in advance. (See page 173)
The SMTP Auth Password. (When you set this Parameter, change the setting of
Fax Parameter No. 170 (SMTP Authentication) to "Valid" in advance.
(See page 173)
The name of the POP Mail Server with Port Number. (Up to 60 characters)
IP Address of the POP Mail Server with Port Number.
User Name assigned to your machine. (Up to 40 characters)
Password assigned to your machine. (Up to 10 characters)
The name of the LDAP Server with Port Number. (Up to 60 characters)
IP Address of the LDAP Server with Port Number.
Login Name assigned to your machine. (Up to 40 characters)
Password assigned to your machine. (Up to 10 characters)
ID for starting the search in the directory on the LDAP server. (Up to 60
characters)
When the setting is "No", set each IP Address, refer to For Key Operator in the included Operating
Instructions (For Copy & Function Parameters).
Comments