Installing The Machine Head - Brother BAS-300G-484/484SF Instruction Manual

3. INSTALLATION

3-4. Installing the machine head

Pulse motor
Approx. 20 mm
5
Approx. 20 mm
BAS-300G-484, BAS-300G-484 SF
(1) Pins [2 pcs.]
(2) Set screws [2 pcs.]
(3) Hinge rubber assemblies [2 pcs.]
Place the machine head gently on top of
the oil pan and the rubber cushions.
NOTE:
• Be careful not to get the cords
clamped between the machine head
and the oil pan.
• When holding the machine head, do
not hold it by the pulse motor. This
may cause problems with operation
of the pulse motor.
4635M
(4) Hinge holders [2 pcs.]
(5) Bolts [4 pcs.]
(6) Plain washers [4 pcs.]
(7) Nuts [4 pcs.]
(8) Head rest
(9) Bolts with washer [4 pcs.]
4636M