Draining The Oil; Checking The Regulator; Cleaning The Eye Guard; Checking The Needle - Brother BAS-300G-484/484SF Instruction Manual

9. CLEANING

9-3. Draining the oil

9-4. Checking the regulator

9-5. Cleaning the eye guard

9-6. Checking the needle

9-7. Lubrication

Lubricate the sewing machine while referring to "3-15. Lubrication".
53
1. Remove and empty the waste oil tank (1) whenever it is
full.
2. After emptying the waste oil tank (1), screw it back into
its original position.
2550Q
1. If water collects in the bottle of the regulator (1), close
the air cock (2), and then turn the drain cock (3) in the
direction of the arrow to drain the water.
2. After draining the water, tighten the drain cock (3).
3. Open the air cock (2).
Open
Close
4678M
Wipe the eye guard clean with a soft cloth.
NOTE:
Do not use solvents such as kerosene or thinner to clean
the eye guard.
2208B
Always check that the tip of the needle is not broken and
also that the needle is not bent before starting sewing.
4679M
BAS-300G-484, BAS-300G-484 SF