Advertisement
Before You Start (continued)
2. Verify that your facility has adequate network wiring for your
sub-network (subnet) connections. To manage the storage
system, each storage processor (SP) requires a separate network
connection.
3. If your environment includes switches on the path between the
FC4700 and the hosts (servers) that have access to it, make sure
the switches are installed. Refer to the device-specific
installation manuals for each switch.
4. Verify that the Standby Power Supplies (SPSs), Disk Processor
Enclosure (DPE), and any optional Disk Array Enclosures
(DAEs) are installed in your cabinet. If necessary, refer to the
appropriate cabinet, rail, or device hardware installation
documentation you received with your system.
5. Have the network administrator at your facility set up IP
addresses for the FC4700 and complete the worksheet provided
in Step 1 on page 5.
6. Make sure that the latest revisions of Navisphere
Event Monitor are installed on the Windows
®
NT
host you will use as the Navisphere management station.
Refer to the EMC Navisphere Manager Administrator's Guide,
EMC Navisphere Event Monitor Administrator's Guide, and the
appropriate Release Notes as necessary.
®
2000 or Windows
4
®
Manager and
Advertisement
