Advertisement
Initializing the FC4700 requires a directly connected computer -—
usually a laptop model — that we refer to as a service laptop.
IMPORTANT The following guidelines outline how experienced
technical personnel initialize an FC4700 storage system. For
explanations and detailed initialization instructions, refer to
Chapter 3 in the FC4700 Rackmount Model Hardware Reference.
Service Laptop Setup
1. Connect the service laptop to the serial port on SP-A with the
null modem cable.
Service
laptop
2. Make sure Dial-Up Networking between 2 PCs is installed
and set up on the service laptop.
3. Set up Dial-Up Networking.
4. Modify the laptop's TCP/IP network settings to use DHCP.
Initialize the FC4700
COM1
RS-232 cable
Step 5
8
SP-B
SP-A
EMC1996
Advertisement
