Advertisement
Circuit
breaker
SPS-A
power
switch
1. Plug the two 240-volt ac power cables into the power outlets in
your facility. We recommend connecting each power cable to a
different branch circuit. Both power cables must be connected to
the appropriate power supply. Connecting only one power source
will degrade the FC4700's performance.
2. Turn on the circuit breakers on each of the cabinet's side power
strips.
3. Turn on the power switch on each standby power supply.
If warning lights appear on the front of the DPE, make sure the system is
correctly cabled and then refer to the fault code explanations in Chapter 4
of the FC4700 Hardware Reference. If you cannot determine any reasons
for errors, contact your FC4700 service provider. (Operators with valid
contracts can contact EMC Customer Service at USA (800) 782-4362,
Canada (800) 543-4782, or worldwide (508) 497-7901.)
Step 4
Start the FC4700
7
Circuit
breaker
SPS-B
power
switch
EMC1995
Advertisement
