Advertisement
Create storage groups using Navisphere Manager from the Navisphere
management station.
IMPORTANT The following steps summarize the process for
creating storage groups in an FC4700 storage system. For detailed
instructions on each procedure, refer to the EMC Navisphere
Manager Administrator's Guide.
LUN and Storage Group Creation
Refer to the worksheets you filled out in the EMC Fibre Channel
Storage System Model FC4700 Configuration Planning Guide as you
perform the following tasks.
1. Select the FC4700 storage system you want to configure.
2. Create the RAID Groups you want on the FC4700.
3. Bind one or more LUNs in each RAID Group.
4. When you have bound all the LUNs on an FC4700 without
Access Logix, reboot the server.
The host will now recognize the new LUNs. Skip the next procedures
and continue with Step 11, Complete the Host Setup.
5. If your system includes Access Logix, create each Storage Group
you want and assign it to the appropriate hosts.
•
You can connect a host to only one Storage Group per array.
•
You must connect clustered hosts to the same Storage Group.
6. Reboot the server before continuing with the next step.
Step 10
Create FC4700 Storage Groups
15
Advertisement
