Advertisement
HBA and Driver Installation (continued)
6. Install CLARiiON
available for your host, and your configuration requires it.
•
FC4700 storage systems support CDE in IBM AIX
Solaris
environments.
•
Configurations with only one host HBA require CDE.
7. Activate the driver. Depending on the host, you may need to
reboot the host.
Navisphere Host Software Installation
Refer to the appropriate EMC Navisphere Server Software Setup Guide
to complete the following for each host that will use the storage system.
1. If the host has multiple HBAs connected to the storage system
and Navisphere® Application Transparent Failover (ATF) is
available, install ATF.
FC4700 storage systems support ATF in AIX, NetWare, Solaris,
Windows NT and Windows 2000 environments.
2. Activate the ATF devices by rebooting the host.
3. Install the Navisphere Host Agent and optional CLI.
4. Start the Host Agent.
5. If you plan to install SnapView software, install the admsnap
host management utility software.
Step 9
Set Up the Hosts (continued)
®
Driver Extension (CDE) software if CDE is
®
, and Microsoft Windows NT
®
and Windows
14
®
, Sun
®
2000
Advertisement
