Advertisement
Critical Parameter Setup
On the FC4700:
5. Set up a user account.
6. Create the Persistent Storage Management (PSM) LUN.
7. Specify privileged users for the FC4700.
8. Set the SPS test time for each SPS in your system.
Network Information Setup
9. Specify the hostname, IP address, subnet mask, and gateway
address for SP-A. Use the information you collected and entered
earlier in Step 1, Gather Network Information.
10. Disconnect the service laptop from SP-A and connect it to the
serial port on SP-B.
Service
laptop
11. Specify the hostname, IP address, subnet mask, and gateway
address for SP-B. Use the information you collected and entered
earlier in Step 1, Gather Network Information.
Initialize the FC4700 (continued)
COM1
RS-232 cable
Step 5
9
SP-B
SP-A
EMC1997
Advertisement
