Installing A Disk Module - Dell FC4500 Hardware Reference Manual

Servicing and Upgrading a DPE
3
Installing a Disk
EMC Fibre Channel Disk-Array Processor Enclosure (DPE) Hardware Reference
3-12
Continue to the next section to install the new or replacement
disk module.
1. Gently insert the module as follows:
Module

Installing a Disk Module

Figure 3-5
The disk module Active light flashes to reflect the spin-up
sequence (see page 3-2).
After inserting a disk module, wait for the activity lights on the other
drives to resume a steady flicker before inserting another module. The
activity lights show that the Core Software has rediscovered the FC loop.
2. Remove and store the ESD wristband.
The door must be closed for EMI compliance when the DPE is powered
up. Open it only to replace or add a disk module.
Latch
A.
Grasp the disk module's handle.
B.
Align the module with the
guides in the slot.
C.
Gently push the module into the
slot until the latch engages.