Table of Contents
Advertisement
Drive Type
SP Optical Cabling
LCC Copper
Cabling
Standards
Certification and
Compliance
3.5-inch drives, Fibre Channel interface, 2.54 cm (1.0-inches) or 4.06
cm (1.6-inches) tall.
The SP optical cable interface to the external Fibre Channel
environment is as follows:
Type
50 m or 62.5 m, multi-mode, dual SC
Length
50 m: 2 m (6.6 ft) minimum to 500 m (1,650 ft) maximum 62.5 m: 2
m (6.6 ft) min to 300 m (985 ft) maximum
Bend radius
3 cm (1.2 in) minimum
The DPE's LCC expansion port interface to the DAE is copper cable
as follows:
Type
Shielded, 150 differential, shield bonded to DB-9 plug connector
shell (360×)
FC-AL Standard, Revision 4.4 or higher
Length
0.3 m (1 ft) min, 10 m (33 ft) max unequalized between DPE and
DAEs
A stand-alone DPE will be tested and certified for compliance with
the international environmental and safety specifications listed next.
Each DPE will be marked to indicate such compliance and
certification as required.
Technical Specifications and Operating Limits
Technical Specifications
A
A-3
Advertisement
Table of Contents
