Table of Contents
Advertisement
HNDR-S4824
Basic Configuration
Basic Configuration
3. Monitoring
Once power is supplied to HNDR-S4824, all connected channels will be displayed by split monitoring
mode (When 8 analog channels are connected, 9-spilit screens will show). The following steps apply for
all HNDR-S4824's monitoring menus.
<Note>
HNDR-S4824 supports dual monitor (A, B). Monitor A(Normal) supports all functions, but Monitor
B(Spot) doesn't support spilit screen, menu setting and zoom function. However when Monitor A runs
as Playback mode, Monitor B can't run Playback mode simultaneously.
The following functions are described on the base of Monitor A.
For controlling Monitor A, Monitor A should be selected with the front panel menu.
3.1. Viewing basic screen (16 ch split)
- Insert AC cord's plug in a wall outlet, and HNDR-S4824 starts running automatically.
- LED is on and HNDR-S4824 starts booting.
- After start-up, the basic screen (16ch-split) is displayed.
* If user password is set, a dialogue box for entering the password will appear.
3.2. Viewing single full screen
- Press the desired channel number button on the front panel of HNDR-S4824.
- To return to the multi-view screen, press the [MULTI] button.
3.3. Viewing multi screen
- Press the [MULTI] button to view several channels simultaneously.
- To change the split screen configuration, press the [MULTI] button. 4 / 9 / 16 / 13 split screens will be
displayed.
12
Honeywell
2004.05.31 (v 2.0)
Advertisement
Table of Contents
