Kodak i780 Manual page 46

3-28
• Action when timeout occurs: allows you to specify the action that
will be taken when the document feeder timeout has been reached.
- Stop Scanning: scanning will stop and control will return to the
scanning application (i.e. ends the job).
- Pause Scanning: scanning will stop but the scanning application
will be waiting for additional images (i.e. stops the feeder).
Scanning may be resumed by pressing the Start/Resume button
on the scanner. Scanning may be stopped by pressing the Stop/
Pause button on the scanner or via the scanning application.
• Automatically start scanning: if selected, the scanner will
automatically start the feeder, without pressing the Start/Resume
button on the scanner. The scanner will wait the amount of time
specified by the document feeder timeout for a document to be fed
into the scanner. Once the input elevator has been emptied, the
scanner will pause scanning; scanning is resumed by pressing the
Start/Resume button on the scanner.
• Lightweight paper: improves output stacking when scanning
lightweight paper. When selected, the scanner will increase the gap
between documents in order to allow each document to settle in the
output tray before the next document gets to the output tray.
NOTE: Using this option will decrease overall throughput.
Sheet Counter — enter a value that will be used to assign the
document count for the next document entering the scanner. This is
incremented sequentially by the scanner and is returned in the image
header.
Diagnostics — displays the Diagnostics tab.
A-61504 October 2007