Diagnostics - Debug tab
A-61504 October 2007
• While calibration is being performed, the following message will
be displayed.
3. Click OK when calibration is successful.
The Debug tab allows you to turn on options that allow support
personnel to diagnose any issues you may encounter when using your
scanner. It is suggested that you only make changes on this tab when
instructed by Kodak support personnel.
Logging — saves the communications between the scanner and the
scanning application. The options are: Off (the default), On or Custom.
NOTES:
• Flag and Filter are only available for Custom; only make changes as
directed by Kodak support personnel.
• For changes to take effect, you must restart your application.
3-41