Haier HWM70-918NZP User Manual page 12

1
Push the "
It has the special power resume function. In the case of power failure or the power plug is
loose during running, the machine can save the running program, and resume the program
after the power supply is recovered. You do not need to set the program again.
2
Push the "
After the power is switched on, "Memory" is automatically set. To select other full-auto
programs, please push the "Program" button till the corresponding indicator is on. Refer to
the "Program" button on Page 11.
E.g. Set to "Quick"program for small quantity of laundries with light soil.
When a standard cycle is selected, the fuzzy program is run. The water level and the washing
time can be selected according to be texture and volume of the laundry. The washing cycle is
automatically controlled.
3
Push "
procedure program
Even there's no water in the tub, a certain period is required before spin starting.
Separate the laundries that are not colorfast from other laundries in washing.
After the machine starts operation, you can only set the program and procedure during
washing and soaking,
During rinsing ,you can only set the spinning time, and can not make setting in other cases.
During Quick, Tub Dry programs, push the Wash, Rinse,Spin button the machine has
no reaction.
4
Push the "
For Standard program, the washing machine will execute fuzzy program automatically to detect
the cloth. After defection, it can set the water level automatically.To select other water level, first
push the "Start/Pause" button, then push the "Water Level" button to set the water level.
5
Push the "
If you choose "1st Rinse" and "2nd Rinse" together ,the machine will keep the after first and second
rinsing water .
12
" button to switch on the power
" button to select suitable automatic program
Program
" " " "
" button, select suitable water level
level
" button, select suitable reserve water times
Reserve
Water
" button to select suitable