Table of Contents
Related Manuals for Haier HWM70-1203D
Summary of Contents for Haier HWM70-1203D
-
Page 1: User Manual
AUTOMATIC FRONT LOADING WASHING MACHINE USER MANUAL HWM70-1203D HWM80-1403D HWM70-1203D 1200 Mixed 1000 Spin/Drain HIGH SPEED Wash Temp. Spin Speed Intense Extra Rinse Start/Pause 1200rpm Arial Regular 18pt ,100%black colour... -
Page 2: Table Of Contents
03 - 09 10 - 15 16- 20 tAbLe oF contents beFore use using the AppLiAnce MAINTENANCE > componenTs ........03 > > Display coDes .......18 program selecTion ......10 > preparaTion........0 > > TroubleshooTing......1 consumpTion anD Technical DaTa ..11 > safeTy insTrucTions ....05 >... -
Page 3: Before Use
You must produce both warranty card and proof of purchase in the event of a warranty repair being required. When you purchase any new Haier Product you automatically receive a two year Manufacturer's Warranty covering parts and labour for servicing. -
Page 4: Preparation
This is normal phenomenon resulting from water tests in the factory. DESCRIPTION This diagram may differ slightly from the layout of the washing machine you have just purchased due to technical improvements. HWM70-1203D 1200 Mixed 1000 Spin/Drain... -
Page 5: Safety Instructions
Before use sAFety instructions BEfORE SwITChINg ThE APPLIANCE ON fOR ThE fIRST TIME Do ... Do noT ..make sure that the transport bolts are removed..Touch or use the appliance when barefoot or with wet ... use a separate earthed socket for the power supply. or damp hands or feet. -
Page 6: Installation
Before use instALLAtion REMOVINg ThE TRANSPORTATION BOLTS The transportation bolts are designed for clamping anti-vibration components inside of the washing machine during the transportation process. remove the back cover. remove the four bolts on the rear side and take out the synthetic stabilisers from within the machine. - Page 7 Before use INLET hOSE 1. connect the nut on the inlet hose to the connector on the water valve. 2. connect inlet hose to a water tap with cold, fresh water. Note: Use the hose-set supplied with the appliance. Old hose-sets should not be reused.
-
Page 8: Control Panel
BEFORE USE CONTROL PANEL HWM70-1203D 1200 Mixed 1000 Spin/Drain HIGH SPEED Wash Temp. Spin Speed Intense Extra Rinse Start/Pause 1200rpm (7kg Model shown) Arial Regular 18pt ,100%black colour Detergent/Softener Drawer Extra Rinse Power Button Start/Pause Button Program Dial Wash Temp... - Page 9 Before use ¬ _ Touch this button lightly to select the desired speed. When a speed is set, it will be displayed on spin speed the indicator.note: if there is no indicator light displayed, it means no spinning. Note: Different water temperatures and spinning speeds can be set for different laundries.
-
Page 10: Program Selection
USING THE APPLIANCE PROGRAM SELECTION PROGRAM MODES 1 Detergent compartment for prewash mode 2 Detergent compartment 3 Compartment for softener HWM70-1203D HWM80-1403D Preset spin speed Program Maximum Preset Laundry Type Preset spin speed 400 rpm ¬ Wool - - to 40 °C 30°C... -
Page 11: Consumption And Technical Data
If the machine is used for commercial purposes the warranty will be void. Do not use for purposes other than that for which it was designed. Follow the instructions given on the label of each garment and wash only machine-washable garments. HWM80-1403D HWM70-1203D PROGRAM MAX.LOAD TEMPERATURE... -
Page 12: Washing Methods
using the APPLiAnCe WAshing methods pLeAse note This washing machine is for domestic use only. if the machine is used for commercial purposes the warranty will be void. Do not use for purposes other than that for which it was designed. follow the instructions given on the label of each garment and wash only machine-washable garments. - Page 13 USING THE APPLIANCE LOADING THE MACHINE HWM70-1203D 1200 Mixed 1000 Spin/Drain HIGH SPEED Wash Temp. Spin Speed Intense Extra Rinse Start/Pause 1200rpm Arial Regular 18pt ,100%black colour ¬ When first using the washing machine, let it run unloaded for one program to prevent the laundry from being tainted by oil or dirty water from the washing machine.
-
Page 14: After Washing
The "End" sign will appear on the display. Open the washer Wash Temp. Spin Speed Intense Extra Rinse Start/Pause door and take out the laundry. Arial Regular 18pt ,100%black AFTER WASHING HWM70-1203D 1200 Mixed 1000 Spin/Drain HIGH SPEED Wash Temp. Spin Speed... - Page 15 USING THE APPLIANCE CARE CHART Resistant material Bleachable in cold water Don't dry clean Delicate fabric Do not bleach Dry flat Washable at 95 °C Iron at 200 °C Hung to dry Washable at 60 °C Iron at 150 °C Dry on clothes hanger Washable at 40 °C Iron at 100 °C...
-
Page 16: Cleaning & Care
maintenance cLeAning & cAre AfTER wAShINg Turn off the water supply and pull out electricity plug(fig.1) after each wash. open the washer door to prevent formation of moisture and odours. if the washing machine is left idle for a long period, turn off water supply (fig.1b)drain the water in the machine and replace the drain hose. - Page 17 If the washing machine is left idle for a long period, pull out the electrical plug and turn off the water supply. Open the washer door to prevent formation of moisture and odours. Leave the door ajar while not in use. HWM70-1203D 1200...
-
Page 18: Maintenance
maintenance dispLAy codes DISPLAy CODES AND SPECIAL fUNCTIONS coDes causes soluTions err1 ¬ Door is not properly shut. _ shut the door properly. err2 ¬ Drainage error, water not emptied within 6 _ clean the filter and check the drain hose for blockage. if error minutes. -
Page 19: Troubleshooting
maintenance troubLeshooting TROUBLEShOOTINg The following circumstances do not mean there is a fault with the appliance. contact the customer care Team when you have confirmed the problem after following the instructions below. problem causes soluTions Washing machine fails to ¬ poor connection to the power supply. _ check connection to the power supply. -
Page 20: Important Safety Information
Important Safety InformatIon Do not use a multiple socket extension cord. a separate earthed socket is required which shall be accessible at all times. if the mains cord becomes damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person with a lead of the same type and rating to avoid a hazard.