Xem-2Xp Dual 10 Gigabit Xfp Ports - Allied Telesis SWITCH AND SWITCHBLADE X900 Hardware Installation Manual

Expansion Modules

XEM-2XP Dual 10 Gigabit XFP Ports

The XEM-2 XP Dual 10 Gigabit Ethernet expansion module features:
■
two XFP ports
■ four LEDs (one set for each XFP port) showing port status
■ support for hot-swappable XFP transceiver modules
Front view XEM-2 XP
The following LEDs report operations and faults on the XEM-2XP.
LED
L/A
(Link Activity)
XFP
8
1
L/A
XFP
L/A LINK
State
Green
Green flashing
Off
Green
Amber
Amber flashing The installed XFP transceiver is not ready or
Off
L/A
XFP
ACT XFP ENABLED DISABLED
Description
An XFP transceiver is installed and a 10 Gbps
link has been established.
An XFP transceiver is installed and link
activity is occurring.
A link has not been established.
An XFP transceiver is installed and enabled.
An XFP transceiver is installed but not
operating or is disabled.
has a fault.
An XFP transceiver is not installed.
2
FAULT