Gigabit Ethernet Switch User's Guide
defined as static entries that may be added and removed from the Filtering Database by the user. They are
not automatically removed by any timeout mechanism.
To access the Static Filtering Table screen, select Configure Filtering and Forwarding Table from
the System Configuration menu. Then select Configure MAC Address Filtering from the bottom of
the Configure Filtering and Forwarding Table screen. The following screen appears:
Figure 6-21. Static Filtering Table screen
To make a change to the Static Filtering Table screen, choose Add or Remove in the Action field. Then enter
the MAC Address and VLAN ID number (if applicable) and press APPLY.
Configure Static Multicast Forwarding
The Static Multicast Forwarding Table screen allows you to forward traffic over each port for one
multicast group. To access this screen, select Configure Static Multicast Forwarding from the Configure
Filtering and Forwarding Table screen. The following screen will appear:
Figure 6-22. Static Multicast Forwarding Table screen
To make a change to the Static Multicast Forwarding Table screen above, choose Add or Remove in the
Action field. Then enter the MAC Address and VLAN. Next place a V over the dash "–" in the Port field to
44