Configure Ip Address - D-Link DGS-3208TG - Switch User Manual

Gigabit Ethernet Switch User's Guide
Figure 6-8. System Configuration menu
You will need to change some settings to be able to manage the Switch from an SNMP-based network
management system such as SNMP v1 or to be able to access the Switch using the Telnet protocol. See the next
chapter for Web-based management information.

Configure IP Address

The Switch needs to have a TCP/IP address assigned to it so that the network management system or Telnet
client can find it on the network. The IP Configuration screen allows you to change the settings for the two
different interfaces used on the Switch: the Ethernet interface used for in-band communication, and the SLIP
interface used over the console port for out-of-band communication.
Choose Configure IP Address to access the first item on the System Configuration menu. The following
screen appears:
Figure 6-9. IP Configuration screen
Each of the fields on this screen takes effect the next time the system is restarted. Fields that can be set
include:
32