Switch Management Concepts; Local Console Management; Console Port (Rs-232 Dce); Ip Addresses And Snmp Community Names - D-Link DGS-3208TG - Switch User Manual

Gigabit ethernet switch
Hide thumbs Also See for DGS-3208TG - Switch:
Table of Contents

Advertisement

Gigabit Ethernet Switch User's Guide
5
S

Local Console Management

Local console management involves the administration of the DGS-3208TG Switch via a direct connection to
the RS-232 DCE console port. From the Main Menu screen of the console program, an Administrator or
Normal User (defined in the next chapter) has privilege and access to manage, control, and monitor the many
functions of the Switch.
The components of the Switch allow them to be part of a manageable network. These components include a
CPU, memory for data storage, other related hardware, and the SNMP agent firmware. Activities on the
Switch can be monitored with these components, while the Switch can be manipulated to carry out specific
tasks.
Out-of-band management for the Switch is accomplished through a locally connected management terminal to
the RS-232 console port. Through this port, a user can set up, monitor, or change the configuration of the
Switch.
The Spanning Tree Algorithm (STA) provides the capability for the Switch to operate properly with other
Bridges in a SNMP network supporting the STA. Using the STA, the network will prevent network loop, and
automatically establish and activate a backup path in the event of a path failure.

Console port (RS-232 DCE)

Out-of-band management requires connecting a PC (with a SNMP management platform) to the RS-232 DCE
console port of the Switch. Switch management using terminal emulation/VT100 when connected to the RS-
232 DCE console port is called Local Console Management to differentiate it from management done via
management platforms.
The console port is set for the following configuration:
Baud rate:
Parity:
Data width:
Stop bits

IP Addresses and SNMP Community Names

Each Switch has its own IP Address, which is used for communication with an SNMP network manager or
other TCP/IP application (for example BOOTP, TFTP). You can change the default Switch IP Address to meet
the specification of your networking address scheme.
M
WITCH
ANAGEMENT
9,600
none
8 bits
1
12
5
C
ONCEPTS

Advertisement

Table of Contents
loading

Table of Contents