Steps To Create Administrator Or Normal User Access - D-Link DGS-3208TG - Switch User Manual

Gigabit Ethernet Switch User's Guide
When you first connect to the Switch, you will be presented with the first login screen (shown below). If the
initial login screen does not appear, press Ctrl+R (hold down the Ctrl key, press and release the R key, and
then release Ctrl) to call up the screen. Ctrl+R can also be used at any time to refresh the screen.
Figure 6-2. Initial Screen, first time connecting to the Switch
Press <Enter> (Note: Leave the Username and Password fields blank). You will see the main menu shown
below:
Figure 6-3. Main Menu
The first user automatically gets Administrator privileges (See Table 6-1). It is recommended to create at least
one Administrator-level user for the Switch.

Steps to Create Administrator or Normal User Access

From the screen above, move the cursor to User Accounts Management and press <Enter>. The User
Account Management menu appears.
1. Choose Create/Modify User Accounts from the User Account Management menu. The Add/Modify
User Accounts menu appears.
27