Filter Table
MAC filtering allows the Switch to block inbound traffic from unknown or unwanted devices by mapping a
port to a source MAC address.
To use the MAC filtering function, enter the MAC address of the device allowed to send traffic in the MAC
Address field and select the desired setting in the Filter Status field. Then click Apply.
The information in the window is described as follows:
MAC Address The Ethernet address of the MAC filtering table entry.
VLAN The VLAN ID number of the MAC filtering table entry.
Click the arrow icon to access the Add MAC Address Filtering Table Entry window:
Figure 7-17. MAC Address Filtering Table window
87
Gigabit Ethernet Switch User's Guide