Table of Contents
Advertisement
This allows you to enable or disable these agents and set aging timers for them.
Items in the above screen are defined as follows:
VLAN ID This is the VID number for the VLAN that has an agent attached to it which enables IGMP
packets to be sent and received.
Age-out Timer If no IGMP query packet has arrived at the Switch before this timer has expired, the
Switch will become the IGMP host for this VLAN.
IGMP Status Activates or deactivates the agent on this VLAN.
Configure Port-based IGMP
If the Switch is in Port-based mode, the IGMP Configuration screen will offer a VLAN Settings section in
the lower part of the screen. Select Configure Port-based IGMP to access the following Port-based IGMP
Configuration screen:
Figure 6-26. IEEE 802.1Q IGMP Configuration screen
Figure 6-27. Port-based IGMP Configuration screen
47
Gigabit Ethernet Switch User's Guide
Advertisement
Table of Contents
