Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
Choose Add/Remove IGMP Control Table from the screen above to define up to 12 VLANs on the Switch
which can send and receive IGMP packets:
The above screen is used to specify an agent to interface between IGMP and VLAN. The agents are assigned
to a VLAN and allow IGMP query and report packets to be present on the given VLAN. Only 12 agents can
exist on the switch at any one time.
Items in the above screen are described below:
Action Adds or removes an entry (agent) from the table.
VID The VLAN number that you wish to create an agent for.
Press APPLY to add the agent to the table.
Go back to the IEEE 802.1Q IGMP Configuration menu and choose Configure IGMP Control Table in
order to activate or deactivate the agents and configure settings for them. The following IEEE 802.1Q IGMP
Configuration screen appears:
Figure 6-24. IEEE 802.1Q IGMP Configuration menu
Figure 6-25. Add/Remove IGMP Entry screen
46
Advertisement
Table of Contents
