Front; Side; Back - Dynex DX-19L200A12 User Manual

TV components

Front

# Item Description
Receives the signals from the remote
1 Remote sensor
control. Do not block.
Lights red when your TV is in standby
2 Power indicator mode. For more information, see "Turning
your TV on or off" on page 16.

Side

# Button Description
1 VOLUME+/– Press to increase or decrease the volume.
Press to go to the next or previous channel in
2
CHANNEL /
the channel list.
Press to open the on-screen menu. For more
3
MENU information, see "Navigating the menus" on
page 17.
Press to open the INPUT SELECT list, then
press
For more information, see "Selecting the
4 INPUT/ENTER
video input source" on page 16.
Press to select the desired setting during
menu screen operations.
Press to turn your TV on or off (standby
mode). When your TV is in standby mode,
5 POWER
power still flows through it. To completely
disconnect power, unplug the power cord.
or to select a video input source.

Back

VIDEO IN
# Item
1 AC Power connector
2 Headphone jack
COMPONENT IN Y, P , P
B R
3
jacks
4 L/R AUDIO IN jacks
5 VIDEO jack
6 PC MONITOR IN jack
7 PC/DVI AUDIO IN jack
8 HDMI jack
DX-19L200A12
PC/DVI
AUDIO IN
Description
Plug the AC power cable into this
connector.
Plug a headphone into this jack.
Connect the video for a component
video device to these jacks. For more
information, see "Using component
video (better)" on page 11.
Connect the Left and Right audio
output from the device to the white
and red jacks, respectively. For more
information, see "Using composite
video (good)" on page 12, or
"Connecting a VCR" on page 12.
Connect a standard, composite video
device, such as a VCR, to the yellow
jack. For more information, see "Using
composite video (good)" on page 12,
or "Connecting a VCR" on page 12.
Connect the video from a computer to
this jack. For more information, see
"Connecting a computer" on page 13.
Connect the audio for a computer or a
DVI device to this jack. For more
information, see "Connecting a
computer" on page 13 or "Using DVI
device (same as HDMI but requires a
sound connection)" on page 11.
Connect an HDMI device to this jack.
An HDMI cable carries both video and
sound. You do not need to make an
audio connection for an HDMI device.
For more information, see
"Connecting a cable or satellite box"
on page 7 or "Connecting a DVD or
Blu-ray player" on page 10.
5