Dynex DX-19L200A12 User Manual page 12

8
DX-19L200A12
Using DVI (same as HDMI but requires an audio
connection)
To connect a cable or satellite box using DVI:
1
Turn off your TV and all connected equipment.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect an HDMI-DVI adapter (not provided) to one
end of an HDMI cable (not provided), then connect it
to the DVI OUT jack on the cable or satellite box.
4
Connect the other end of the HDMI cable to the
HDMI IN jack on the back of your TV.
Cable or satellite box
5
Connect a 3.5 mm audio cable (not provided) to the
PC/DVI AUDIO IN jack on the back of your TV and to
the AUDIO OUT jack on the cable or satellite box.
6
Turn on your TV, then turn on the cable or satellite
box.
7
Go through the setup wizard on page 15.
PC/DVI
AUDIO IN
Back of TV
HDMI cable with HDMI-DVI adapter
3.5 mm audio cable
75 ohm cable
Cable TV wall
outlet
Using component video (better)
To connect a cable or satellite box using component
video:
1
Turn off your TV and all connected equipment.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect a component video cable (not provided) to
the COMPONENT IN/Y, P
your TV and to the component video out jacks on
the cable or satellite box.
Component video cable
Cable or satellite box
75 ohm cable
4
Connect an audio cable (not provided) to the L and
R audio jacks on the back of your TV and to the
audio out jack on the cable or satellite TV box.
5
Turn on your TV, then turn on the cable or satellite
box.
6
Go through the setup wizard on page 15.
Making connections
, P jacks on the back of
B R
Back of TV
VIDEO IN
Cables are often
color-coded to match
color-coded jacks.
Audio cable
Cable TV wall
outlet