Remote Control; Making Connections; What Connection Should I Use - Dynex DX-19L200A12 User Manual

6
DX-19L200A12
# Item
DIGITAL AUDIO
9
COAXIAL OUT jack
10 ANT. (RF) IN jack

Remote control

# Button Description
Press to turn your TV on or off (Standby
mode). When your TV is off, power still flows
1 POWER
into it. To disconnect power, unplug the
power cord.
Press to enter a digital sub-channel number.
.
2 For more information, see "Selecting a
channel" on page 16.
Press to set the sleep timer. For more
3 SLEEP information, see "Using the Sleep setting" on
page 16.
Press to increase or decrease the volume.
4 VOL+/VOL–/ Press the arrow keys to navigate through the
on-screen menus and adjust settings.
5 MENU Press to open the on-screen menu.
Press to reset the picture and audio settings
6 RESET
to factory default.
Press to open the INPUT SELECT list, then
press
7 INPUT
For more information, see "Selecting the
video input source" on page 16.
Press to select the aspect ratio. For more
8 ZOOM information, see "Setting the TV picture size"
on page 19.
Description
Connect a digital audio amplifier cable
to this jack. For more information, see
"To connect a basic home theater
system using digital audio:" on
page 14.
Connect an antenna or cable TV to this
jack. For more information, see
"Connecting an antenna or cable TV
(no box)" on page 10.
or to select a video input source.
# Button Description
9 MTS/SAP Press to select the soundtrack language.
Press to enter channel numbers and the
10 Numbers
parental control password.
11 RECALL Press to go to the last viewed channel.
Press to mute the sound. Press again to
12 MUTE
restore the sound.
Press to go to the next or previous channel
in the channel list. For more information, see
13 CH+/CH–/ "Selecting a channel" on page 16. Press the
arrow keys to navigate through the
on-screen menus and adjust settings.
14 ENTER Press to confirm selections or changes.
15
EXIT Press to close the on-screen menu.
Press to display TV status information, such
as the channel number, channel name (if
16
INFO available), or signal source. For more
information, see "Viewing program
information" on page 16.
Press to display the Closed Caption menu
17 CCD
screen.

Making connections

What connection should I use?

Your TV has several connection types for connecting
devices to your TV.
For the best video quality, you should connect a device to
the best available connection.
Use the following tables to identify cables:
Connection Video
type and jack quality
HDMI
Best (use this
video/audio
if your
devices have
HDMI)
Component
video (requires
an audio Better than
connection) composite,
or coaxial
Composite
video (requires
an audio
Better than
connection)
coaxial
Coaxial (RF)
video/audio
Good
Making connections
Cable connector