Dynex DX-19L200A12 User Manual page 13

Making connections
Using composite video (good)
To connect a cable or satellite box using composite
video:
1
Turn off your TV and all connected equipment.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect a composite cable (not provided) to the
VIDEO, L(MONO) AUDIO , and R jacks on the back
of your TV and to the composite video and audio out
jacks on the cable or satellite box.
Cable or satellite box
4
Turn on your TV, then turn on the cable or satellite
box.
5
Go through the setup wizard on page 15.
VIDEO IN
Back of TV
Cables are often color-coded to
match color-coded jacks.
Composite cable
75 ohm cable
Cable TV wall
outlet
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1
Turn off your TV and all connected equipment.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect a coaxial cable (not provided) to the ANT.
IN jack on the back of your TV and to the coaxial out
jack on the cable or satellite box.
Cable or satellite box
4
Turn on your TV, then turn on the cable or satellite
box.
5
Go through the setup wizard on page 15.
Notes
• Do not tie the coaxial cable together with the
power cord or other cables.
DX-19L200A12
Back of TV
Coaxial cable
Coaxial cable
Cable TV
wall outlet
9