Front; Back And Side - Dynex DX-32L100A13 User Manual

TV components

Front

# Item Description
Press to open the on-screen menu. For more
1 MENU information, see "Navigating the menus" on
page 20.
Press to open the INPUT SOURCE list, then
press CH
2
INPUT
source. For more information, see "Selecting
the video input source" on page 19.
3 VOL+/VOL– Press to increase or decrease the volume.
Press to go to the next or previous channel in
4
CH /CH
the channel list.
Press to turn your TV on or off (standby
mode). When your TV is in standby mode,
5 (Power)
power still flows through it. To completely
disconnect power, unplug the power cord.
Receives the signals from the remote control.
6 Remote sensor
Do not block.
Turns off when your TV is turned on.
Lights red when your TV is in standby mode.
7 Power indicator
For more information, see "Turning your TV
on or off" on page 19.
or CH to select a video input

Back and Side

# Item
1
(headphone)
2 ANT CABLE IN
3 DIGITAL OUTPUT
4 ANALOG AUDIO OUT
5 COMPONENT IN Y, P , P
B R
6 AV IN
7 PC/DVI AUDIO IN
8 VGA/PC INPUT
9 HDMI1/HDMI2/HDMI3
10 USB
DX-32L100A13
Description
Connect headphones to this jack. For
more information, see "Connecting
headphones" on page 16.
Connect an antenna or cable TV to this
jack. For more information, see
"Connecting an antenna or cable TV
(no box)" on page 11.
Connect a digital sound system to this
jack. For more information, see
"Connecting a basic home theater
system" on page 16.
Connect an audio amplifier to these
jacks. For more information, see
"Connecting a basic home theater
system" on page 16.
Connect the video for a component
video device to these jacks. For more
information, see "Using component
video (better)" on page 10.
Connect the audio (L and R) and video
for a composite video device, such as a
VCR, to these jacks. For more
information, see "Using composite
video (good)" on page 11.
Connect the audio for a computer or a
DVI device to this jack. For more
information, see "Connecting a
computer" on page 14, or "Using DVI
(same as HDMI but requires an audio
connection)" on page 10.
Connect the video for a computer to
this jack. For more information, see
"Connecting a computer" on page 14.
Connect HDMI devices to these jacks.
An HDMI cable carries both video and
sound. You do not need to make an
audio connection for an HDMI device.
For more information, see
"Connecting a DVD or Blu-ray player"
on page 12, or "Using HDMI" on
page 12.
Connect a USB flash drive to this port.
For more information, see
"Connecting a USB flash drive" on
page 15.
5