Dynex DX-19L200A12 User Manual page 15

Making connections
Using DVI device (same as HDMI but requires a sound
connection)
To connect a DVD or Blu-ray player using DVI:
1
Make sure that your TV's power cord is unplugged
and the DVD or Blu-ray player is turned off.
2
Connect an HDMI-to-DVI cable (not provided) to the
HDMI IN jack on the back of your TV and to the DVI
OUT jack on the DVD or Blu-ray player.
DVD or Blu-ray player
3
Connect an audio cable with stereo mini plug (not
provided) to the PC/DVI AUDIO IN jack on the back
of your TV and to the AUDIO OUT jack on the DVD or
Blu-ray player.
Note
When you connect the audio using the PC/DVI
AUDIO IN jack, the audio output is analog.
To play from a DVD or Blu-ray player using DVI:
1
Turn on your TV, then press INPUT to open the
INPUT SELECT list.
2
Press or to select HDMI, then press ENTER.
3
Turn on the DVD or Blu-ray player, then set it to the
output mode. See the documentation that came
with the device for more information.
PC/DVI
AUDIO IN
Back of TV
HDM-to-DVI cable
Audio cable
Using component video (better)
To connect a DVD or Blu-ray player using component
video:
1
Make sure that your TV's power cord is unplugged
and the DVD or Blu-ray player is turned off.
2
Connect a component video cable (not provided) to
the COMPONENT IN/Y, P
your TV and to the COMPONENT OUT jacks on the
DVD or Blu-ray player.
DVD or Blu-ray player
3
Connect an audio cable (not provided) to the L
(MONO) AUDIO and R audio jacks on the back of
your TV and to the L/R AUDIO OUT jacks on the
component video device.
To play from DVD or Blu-ray player using component
video:
1
Turn on your TV, then press INPUT to open the
INPUT SELECT list.
2
Press or to select Component, then press
ENTER.
3
Turn on the DVD or Blu-ray player, then set it to the
output mode. See the documentation that came
with the device for more information.
11
DX-19L200A12
, P jacks on the back of
B R
Back of TV
VIDEO IN
Audio cable
Component video cable
Cables are often color-coded to match
color-coded jacks.