Labeling Channels; Setting Parental Controls - Dynex DX-19L200A12 User Manual

28
DX-19L200A12

Labeling channels

Channel labels appear with the channel number display
each time you turn on the TV, select a channel, or press
INFO.
You can choose any four characters to identify a channel.
To create channel labels:
1
Press MENU. The Main Menu screen appears.
Picture
Audio
CH Channel
Lock
Setup
:Select
2
Press or to select Channel, then press
ENTER. The Channel menu opens.
CH
Channel
Add/Delete
DTV Signal
Auto Ch Memory
Ch Label
:Select
3
Press or to select Ch Label, then press
ENTER. The Ch Label screen opens.
CH
Ch Label
Channel Number
Ch Label
Label Clear
:Select
4
Press or to select the channel you want to label,
then press to select Ch Label.
Main Menu
>>
ENTER :Set
>>
>>
>>
>>
ENTER :Set
15-1
CH-1
>>
:Adjust
5
Press
appears in the first space.
CH
Character rotation is shown below.
When the character you want appears, press ENTER.
Repeat this step to enter the rest of the characters.
or
If you want a blank space in the label name, you
must choose the empty space from the list of
characters.
6
Repeat steps 4-5 for other channels. You can assign a
label to each channel.
7
When you finish inputting the label name, press
EXIT to return to the normal screen.
Notes:
• To clear a channel label, after step 3 above, press
Label Clear, then press or ENTER.
• The channel labels are reset after an Automatic Search.

Setting parental controls

An age limitation can be set to restrict children from
viewing or hearing inappropriate scenes or pictures that
or
you may choose to exclude. The restriction applies to "TV
Rating" and "Movie Rating" if this data is transmitted. You
may set this restriction separately. To use the V-Chip
function, you must register a password.
To register a password:
1
Press MENU. The Main Menu screen appears.
CH
Setting parental controls
or repeatedly until the character you want
Ch Label
Channel Number
Ch Label
Label Clear
:Adjust
:Select
SPACE
Main Menu
Picture
Audio
Channel
Lock
Setup
:Select
15.1
CH-1
>>
ENTER :Set
, () @ / + = -
or to select
>>
ENTER :Set