Connecting Easily To A Smartphone/Tablet (Nfc); Controlling This Camera Remotely With A Smartphone/Tablet By Using The Nfc Function - Panasonic DMC-TS5D Owner's Manual

Connecting Easily to a Smartphone/tablet (NFC)

Using the NFC "Near Field Communication" function, you can easily transfer data necessary
for a Wi-Fi connection between this camera and the smartphone/tablet.
∫
Compatible models
This function can be used with the NFC compatible device with Android (OS version 2.3.3 or
higher). (excluding some models)
Controlling this camera remotely with a smartphone/tablet by using the NFC
function
You can use the following functions by controlling this camera remotely with your smartphone/
tablet.
–
Remote recording
–
Playing back the pictures in the camera
–
Saving the pictures in the camera to the smartphone/tablet, or sending them to WEB services.
–
Sending the acquired location information to the camera.
Preparation:
(On the camera)
•
Set [NFC Operation] to [ON].
(On your smartphone/tablet)
•
Check that your smartphone/tablet is a compatible model.
•
Turn on the Wi-Fi function.
•
Install the "Image App" in advance.
1
Launch "Image App" on your smartphone/tablet.
2
Touch the smartphone/tablet to [
•
This function can be used even while the camera is
turned off.
3
When the connection confirmation screen is
displayed, press 2/1 to select [Yes], and then
press [MENU/SET].
4
Touch the smartphone/tablet to [
again.
•
When the smartphone/tablet has connected, an image of
camera
this will be displayed on the smartphone/tablet.
•
The connected smartphone/tablet is registered to this
camera
. A connection can be established with the
operation of steps
onwards.
•
You can register up to 20 smartphones/tablets. When the number exceeds 20, registrations will be
deleted, starting from the oldest touched one.
•
Performing [Reset Wi-Fi Settings] will delete the smartphone/tablet registration.
(P178)
(P211)
(P176)
1 2
and from the second time
Wi-Fi
(P178)
(P178)
] of the camera.
] of the camera
- 182 -
(P178)