When Sending Images To Av Device - Panasonic DMC-TS5D Owner's Manual

When sending images to AV device

Preparations:
When sending a picture to [Home], set your device to DLNA waiting mode.
•
Read the operating instructions of your device for details.
When sending images to [External], the following are required:
•
Registration to "LUMIX CLUB".
•
Address number and access number acquired by the destination External AV device.
1
Press [Wi-Fi].
2
Press 3/4/2/1 to select [New Connection], and
then press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination
from [History Connection]
3
Press 3/4 to select [Send Images While Recording], and then press [MENU/SET].
4
Press 3/4 to select [AV device], and then press [MENU/SET].
5
Press 3/4 to select [Home] or [External], and then press [MENU/SET].
6
Press 3/4 to select connection method, and then press [MENU/SET].
[Via Network]
[Direct]
•
This can be
selected only
when [Home]
is selected.
7
Press 3/4 to select a device you want to connect, and then press [MENU/SET].
•
When the connection is complete, the screen is displayed. To change the send setting, press
[DISP.]. (P192)
8
Take pictures.
•
To change the setting or disconnect, press [Wi-Fi].
You cannot change the settings while sending pictures. Wait until sending is complete.
(P206)
(P179) or [Favorite Connection] (P180).
When you want to connect to an AV device via a wireless access point.
(P185)
When you want to directly connect an AV device to this unit with [Wi-Fi
Direct], [WPS Connection], or [Manual Connection].
Wi-Fi
(P189)
- 197 -
(P210)
(P187)