Panasonic DMC-TS5 Connection Manual

Digital Camera
Model No. DMC-TS5
Wi-Fi ® Connection Guide
Let's connect to the Wi-Fi
®
 You can connect Wi-Fi compatible devices to the camera wirelessly.
 You can connect them directly or via a wireless access point.
When connecting the camera to a
smartphone/tablet directly
Connecting the camera to a smartphone/tablet
1
Installing the smartphone/tablet app "Image App"
Operation on the smartphone/tablet
1
Connect the smartphone/tablet to a network.
2
Android TM Select "Google Play TM Store".
iOS Select "App Store SM ".
3
Enter "Image App" into the search box.
4
Select "Image App" and install it.
 Supported OS
For Android apps: Android 2.2 ~ Android 4.2
For iOS apps: iOS 4.3 ~ iOS 6.0
 Android and Google Play are trademarks or registered trademarks of Google Inc.
 App Store is a service mark of Apple Inc.
"Wi-Fi" and "Wi-Fi Protected Setup" are marks or registered marks of the Wi-Fi Alliance.

DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certifi cation marks of the Digital Living Network

Alliance.
The camera is not capable of connecting to a wireless network via public
wireless LAN.
VQC9362
When connecting the camera to a TV or
PC, etc. via a wireless access point
SEE REVERSE SIDE
You can record/playback by
using the smartphone/tablet.
You can also save pictures
in the camera on the
smartphone/tablet.
The service may not be able to be used properly depending on the

type of smartphone/tablet being used. For compatible devices, see
the following support site.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
 When downloading the app on a mobile network, high packet communication
fees may be incurred depending on the details of your contract.
2
Connecting the camera to the smartphone/tablet (Remote Shooting)
Connect by using the NFC function
This function can be used with the NFC compatible device with Android (OS version 2.3.3 or later). (excluding some models)
1 2
Image App Image App
Launch "Image App" on Touch the smartphone/tablet
to [ ] of the camera.
the smartphone/tablet.
Connecting manually
Operation on the camera
1 2


 Press camera [ON/OFF] button.
Select [New Connection].

Press [Wi-Fi].
Make sure the Wi-Fi connection You can select the setting
lamp  is lit blue. you used before from [History
 Lit blue: Connection].
The Wi-Fi connection is on standby Please refer to "Owner's Manual
 Blinking blue: for advanced features" (PDF) for
Sending/receiving data through the details.
Wi-Fi connection
Operation on the smartphone/tablet
4 5
On the setting menu Select the same SSID as
of your smartphone/ the one displayed on the
screen in step 3.
tablet, turn on the Wi-Fi
function.
Read the [Help] in the "Image App" menu for further details on how to operate.
[When connecting for the fi rst time]
When the connection screen is displayed, select [Yes], and touch [

the smartphone/tablet again.
 If the camera is not
recognized even when
touching the smartphone/
tablet, change positions
and try again.
 Do not touch this camera
to the smartphone/tablet
strongly.
For information on the

operation and settings
1
of NFC-compatible
If you perform steps and
smartphones/tablets, refer
performing single image playback on
to the operating instructions
of your device. the camera, you can easily transfer
the image to the smartphone/tablet.
3
Select [Remote Shooting]. The SSID and password
are displayed.
To change the connection method, press [DISP.].
(Such as [WPS Connection], [Via Network], etc.)
Please refer to "Owner's Manual for advanced features" (PDF) for details.
SSID refers to the name that is used to identify a network over a wireless LAN

connection. If the SSID matches for both devices, transmission is possible.
 WPS (Wi-Fi Protected Setup TM ) refers to a function that allows you to easily confi gure
the settings related to the connection and security of wireless LAN devices.
( The following is an example of when Android is being used.
Screens vary depending on your OS.)
6 7
Image App
Enter the password Start "Image App" on
displayed on the screen your smartphone/tablet.
in step 3, and connect.
When the connection is
established, the recording
screen is displayed.
] on
2
while