Panasonic DMC-TS5D Owner's Manual page 222

∫
Transferring pictures to a PC
Preparations:
1
Connect the computer and camera with the USB connection cable
(supplied).
•
Check the directions of the connectors, and plug them straight in or unplug them straight
out. (Otherwise the connectors may bend out of shape which will cause a malfunction.) Do
not connect devices to incorrect terminals. Doing so may cause malfunction.
•
Do not use any other USB connection cables except the supplied one or a genuine
Panasonic USB connection cable (DMW-USBC1: optional).
A USB connection cable (supplied)
B Align the marks, and insert.
2
Press 3/4 to select [PC], and then press [MENU/SET].
•
If [USB Mode]
automatically connected to the PC without displaying the [USB Mode] selection screen.
•
When the camera is connected to a PC while [USB Mode] is set to [PictBridge(PTP)], a
message may appear on the PC screen. In that case, close the message, and remove the
USB connection cable safely (P224), and then set the
•
When [USB Mode]
pictures are saved will not be displayed. Set [USB Mode] to [PC].
3
Copy the images to a PC using "PHOTOfunSTUDIO".
•
Do not delete or move copied files or folders in Windows Explorer. When viewing in
"PHOTOfunSTUDIO", you will not be able to play back or edit.
•
Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining battery
power becomes low while the camera and the PC are communicating, the alarm beeps.
"
Refer to Disconnecting the USB connection cable safely
connection cable. Otherwise, data may be destroyed.
• Before connecting or disconnecting the AC adaptor (optional), turn the camera off.
•
Before inserting or removing a card/battery, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.
Connecting to other equipment
Install "PHOTOfunSTUDIO" to the PC.
(P59) is set to [PC] in the [Setup] menu in advance, the camera will be
(P59) in [Setup] menu is set to [GPS assist data], the folder where
[USB Mode]
"
(P224)
- 222 -
to [PC].
before disconnecting the USB